View S1MB-13-F_1303370.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPICE MODEL: S1A S1B S1D S1G S1J S1K S1M S1AB S1BB S1DB S1GB S1JB S1KB S1MB
S1A/B - S1M/B
1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER
Features
* * * * Glass Passivated Die Construction Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 30A Peak Ideally Suited for Automated Assembly Lead Free Finish/RoHS Compliant (Note 3)
B
SMA Dim Min Max
SMB Min 3.30 4.06 1.96 0.15 5.00 0.10 0.76 2.00 Max 3.94 4.57 2.21 0.31 5.59 0.20 1.52 2.40
*
A
C
A B C
2.29 2.92 4.00 4.60 1.27 1.63 0.15 0.31 4.80 5.59 0.10 0.20 0.76 1.52 2.01 2.30
Mechanical Data
* * * * * * * * Case: SMA/SMB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Marking: Type Number, See Page 3 Ordering Information: See Page 3 SMA Weight: 0.064 grams (approximate) SMB Weight: 0.093 grams (approximate)
D
J
D E
H
G E
G H J
*
All Dimensions in mm A, B, D, G, J, K, M Suffix Designates SMA Package AB, BB, DB, GB, JB, KB, MB Suffix Designates SMB Package
Maximum Ratings and Electrical Characteristics
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 100C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load Forward Voltage @ IF = 1.0A Peak Reverse Leakage Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 4) Typical Total Capacitance (Note 1) @ TA = 25C @ TA = 125C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr CT RJT Tj, TSTG
@TA = 25C unless otherwise specified
S1 A/AB 50 35
S1 B/BB 100 70
S1 D/DB 200 140
S1 G/GB 400 280 1.0 30 1.1 5.0 100 2.0 10 30 -65 to +150
S1 J/JB 600 420
S1 K/KB 800 560
S1 M/MB 1000 700
Unit V V A A V A s pF C/W C
Typical Thermal Resistance, Junction to Terminal (Note 2) Operating and Storage Temperature Range
Notes: 1. 2. 3. 4.
Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Thermal resistance junction to terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A.
DS16003 Rev. 16 - 2
1 of 3 www.diodes.com
S1A/B - S1M/B
(c) Diodes Incorporated
0.8
IF, INSTANTANEOUS FORWARD CURRENT (A)
1.0 IF, AVERAGE FORWARD CURRENT (A)
10
1.0
0.6
0.4
0.1
0.2
Resistive or inductive load
0 40
0.01 0 0.4 0.8 1.2 1.6
60
80
100
120
140
160
180
TT, TERMINAL TEMPERATURE (C) Fig. 1 Forward Current Derating Curve
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
30 IFSM, PEAK FORWARD SURGE CURRENT (A)
1000
25
100
Tj = 125 C
20
10
15
1.0
Tj = 25 C
10
0.1
5 1 10 NUMBER OF CYCLES @ 60Hz Fig. 3 Typical Forward Characteristics 100
0.01 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics
DS16003 Rev. 16 - 2
2 of 3 www.diodes.com
S1A/B - S1M/B
(c) Diodes Incorporated
Ordering Information
Device S1x-13-F S1xB-13-F
(Note 5) Packaging SMA SMB Shipping 5000/Tape & Reel 3000/Tape & Reel
* x = Device type, e.g. S1A-13-F (SMA package); S1AB-13-F (SMB package). Notes: 5. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
YWW XXX(X)
XXX = Product type marking code, ex: S1A (SMA package) XXXX = Product type marking code, ex: S1AB (SMB package) = Manufacturers' code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52
IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.
DS16003 Rev. 16 - 2
3 of 3 www.diodes.com
S1A/B - S1M/B
(c) Diodes Incorporated

▲Up To Search▲

Price & Availability of S1MB-13-F

	To Download S1MB-13-F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .